Company Information Our Staff Our Expertise Our Capabilities
News & Announcements Featured Products
Aerospace Stripping Products Cleaners Plating Chemicals Commodity Chemicals Specialty & Lab Chemicals Waste Treatment Products Asphalt products
Plating Line Equipment Anodes/Bags, Wire, Supplies Power Supplies & Rectifiers Masking Products Filter Systems & Supplies Waste Treatment Equipment Pumps
CFS Metal Finishing Handbook Realtime Base Metal Prices Links
Information Request Contact Information


Three Key Advantages To Cleaning Parts With Vapour Degreasing Solvents

Posted on: March 18th, 2014 by canadianfinishing No Comments

Vapour degreasing solvents have been reliably used by manufacturers and finishing professionals for years to clean parts of nearly every shape and size. In its simplest terms, the process suspends parts in the vapours resulting from a heated medium below. The suspended liquid condenses on the cooler surface of the materials to be cleaned and acts on any contaminants, dissolving them away. While there are a host of attractive reasons to utilize this particular method, here are three of the prime factors that many finishing professionals point to when justifying their use.

Vapour Degreasing Solvents Are Perfect For Difficult Jobs

Parts come in all shapes and sizes, and cleaning intricate components can be a challenge. Other aqueous and non-aqueous solutions may struggle to reach small holes or channels, while vapour has proven to be a reliable way to ensure that all oil, dirt and debris is removed. This process also offers the advantage of being inherently gentle. Because parts are suspended above the solution, often with little to no agitation required, delicate components can be cleaned without risk of damage.

Energy and Cost Efficient

This cleaning method continues to be widely used because it has proven itself to be one of the quickest and most effective methods in both small and large scale operations. While vapour degreasing solvents can seem expensive, their overall cost per part cleaned is incredibly low, partially because the cleaning medium can be easily recovered and reused. The process requires minimal labour and equipment takes up very little space on the shop floor.

Cleaning with vapour degreasing solvents uses only a fraction of the energy of many alternative cleaning methods. Many solvents heat and dry much faster than traditional aqueous solutions, utilizing as little as one-fifth of the energy to reach and maintain a boiling temperature and one-seventh of the energy during the drying process.

A Thorough, Reliable Cleaning Method

Vapourized solvents avoid many of the shortcomings of other cleaning methods. Because it isn’t subject to surface tension, the vapour is able to enter and clean smaller openings. Many solvents are also easier to dry and are less likely result in deposits. Because of its inherent flexibility, this innovative finishing process can be used on parts made up of multiple materials and of every shape and size.

Canadian Finishing Systems caries a wide selection of vapour degreasing solvents appropriate for a range of applications. If you have questions about this particular finishing technique, or would like to speak with one of our finishing experts, contact us today at 905-634-5168 or use our convenient online contact form.

Three Reasons For the Continued High Demand For Chromium Plating Supplies

Posted on: February 20th, 2014 by canadianfinishing No Comments

Chromium plating has been one of the most widespread and sought-after finishing techniques of the last century. Chromium‘s impressive luster and eye-catching aesthetics have made it one of the most well -known finishing techniques in the industry. As such, chromium plating supplies remain in high demand by both large manufacturers and smaller providers alike. But what is it about chromium that makes it so special? What has allowed it to shine so brightly all these years?

A Finish Unlike Any Other

There’s truly nothing quite like a Chromium finish, and that factor alone has continued to influence the market for chromium plating supplies since it became a popular commercial finish in the early 1920s. Manufactures turn to it to achieve a specific polished look that is nearly impossible to duplicate using other techniques like vapor deposition or organic coatings. Consumers have come to recognize the look of chromium and its popularity has continued to flourish as it has become a more and more common sight in a huge range of consumer goods.

Chromium Plating Supplies Create A Very Durable Coating

In addition to being beautiful, chromium also possesses a number of technical strengths that manufacturers covet. Chromium provides exemplary corrosion protection and can be applied to a wide range of surfaces, both metal and plastic. Hard-chromium can be used to increase surface durability and reduce friction, making it an ideal material for both consumer and industrial applications.

The Wide-spread Use of Chromium Is Part Of Its Continued Success.

The final factor that has led to the continued demand for chromium plating supplies, is the simple fact that so many manufacturers have become comfortable and dependent on this particular finishing technique. While there are other compounds able to mimic the look of chromium, none can match its durability or inherent luster.

Canadian Finishing Systems is a distributor of chromium plating supplies suitable for a host of electroplating applications. Chromium plating supplies that we distribute are lead anodes, heating and cooling coils, masking tapes, Tolber stop-off maskants, platers wax, fume suppressants, lead anode cleaner, and chromic acid.  If you have questions about this incredibly popular finishing technique, or would like to speak with one of our finishing experts, contact us today at 905-634-5168, or use our convenient online contact form.

Page 2 of 512345